To set the Alarm time – We should enter into ALARM MODE


Firstly push “M” button to set Alarm mode .

abstract-1208053 M II

Now, to enter the alarm time setting mode, press the “S” button for a second or longer. (The hours start flashing…)

* Notice… As you can see, after pressing the “S” button, the last temperature measurement disappeared (in my case 23.2 *C measured at 0:00 “24:00”).

The watch’s memory has just been cleared/reset and now displays ( – -,-* C ). The next temperature measurement will be made exactly at the same time as – Next setting Alarm time – which we are currently setting…

Setting of Hour – to set hour push “R” button. * Note… After inserting a new battery, the wake-up time will automatically be set to 0:00 (24:00) – this is the factory default setting. And this is the time I start setting the watch alarm time!

CIMG0484b * Note…When setting the alarm time in Digital Watch, Analog Watch also remembers your setting. The watch hands also change position synchronously.

Look at the hand of 2nd Analog watch – keeping pace with the digital time and now will display the same time !…( shown below ).


CIMG04854:00 AM

CIMG04865:00 AM

CIMG04876:00 AM

CIMG0489* Note…to set hour PM ( more than 12:00 ) tip 2nd Analog Watch have to do more than a full rotation > 360*… pictured below.

12:00 AM ( 00:00 )

CIMG04904:00 PM (16:00 )

CIMG049111:00 PM (23:00)

CIMG0501Setting of Minute – push “S” button ( Minutes starts blinking…) next push “R” button to set the minute.

abstract-1208053 S

*An interesting, like when you set the hour – 2nd Analog Watch also showed hour – the same time as Digital Watch. Now, while setting the Minutes – 2nd Analog Watch takes over the role – Hour tips ! And more specifically – shows whole set time – Hour plus Minute…( in my case 00:14 – 00:22 – 00:30 )…just like the picture below.




CIMG0505To exit setting Alarm time push “S” button…

CIMG0511As you propably noticed 🙂 the ALARM MODE is inextricably linked with the STORAGE TEMP. FUNCTION ! A detailed description of this feature and How to activate / deactivate the Alarm – I posted on How to use Digital Modes .

6 Replies to “How to set Alarm Time”

  1. Thanks for every other informative site. The place else could I get that type of information written in such a perfect approach?
    I have a project that I’m simply now running on, and I have been at the glance out for such info.
    Joseph K.

  2. Excellent post. I was checking continuously this blog and I’m impressed!

    Extremely helpful info particularly the last part 🙂 I care for such info much.
    I was seeking this certain info for a long time. Thank you and good luck.

  3. Pingback: Bonnie D. Jenkins

Skomentuj admin Anuluj pisanie odpowiedzi

Twój adres e-mail nie zostanie opublikowany. Wymagane pola są oznaczone *

Confirm that you are not a bot - select a man with raised hand: